Solar Station – ICE962P

SKU: ice-ss-962p Category:


1, Features:

Application capacity
Max.number of collectors:1
Max.number of storage tanks:1
Max.number of relays:3
Max.number of sensors:5
Max.number of application system:1

2, Technical datas:

1 Dimension: 420x280x155mm
2 Power supply: 200V-240V  AC  or  100V-130V  AC,50-60Hz.  .
3 Power  consumption:  < 3W
4 Accuracy of temperature measuring: ± 2oC
5 Range of collector temperature measuring: -10oC ~200oC
6 Range of tank temperature measuring: 0oC ~100oC
7 Suitable power of pump: 2 pumps possible to be connected, power of each pump < 200W .
8 Suitable power electrical heating:1 relay for 1500W(1500w-4000w must be use SR802)
9 Inputs: 5sensors,
1pcs*Pt1000 sensor (≤500oC) for collector (silicon cable≤280oC),
4pcs*NTC10K, B3950 sensor (≤ 135oC) for tank, (PVC cable ≤105oC),
10 Outputs:3 relays, for circulation pumps or 3-way electromagnetic valve
11 Ambient temperature:-10oC ~ 50oC.
12 Water proof grade: IP42.

3, Main functions:

1 Pump  support: Normal  Pump or high  Efficiency  pump.
2 Set  up  clock/week
3 THET  Timing  heating
4 CIRC  DHW  water  circuilation  function
5 tCYC  Tempeature  or  time  setting  for  DHW  pump  in  three  time  sections
6 DT  Temperature  difference  for  solar  circuit  pump
7 EMOF  Maximum  switch-off  temperature  of  collector  (for  collector  emergency  close  function)
8 CMX  Maximum  limited  temperature  of  collector  (collector  cooling  function)
9 CMN  Low  temperature  protection  of  collector
10 CFR  frost  protection  temperature  of  collector
11 SMX  Maximum  temperature  of  tank
12 REC  Recooling  temperature  of  tank
13 C_F  Switch  between  Celsius  and  Fahrenheit
14 DVWG  Anti  legionnaires’  function
15 P1  Pump  P1  operation  mode  selection
16 nMIN  Pump  speed  adjustment(RPM  control)
17 DTS  Standard  temperature  difference  of  pump  (for  speed  adjustment)
18 RIS  Gain  for  circulation  pump  (speed  adjusting)
19 Pump  P2  operation  mode  selection
20 FTYP  Flow  meter  type  selection
21 OHQM  Thermal  energy  measuring
22 FMAX  Flow  rate
23 MEDT  Type  of  heat  transfer  liquid
24 MED%  Concentration  of  heat  transfer  liquid
25 INTV  pump  Intermission  function
26 tSTP  Pump  interval  run-off  time
27 tRUN  Pump  interval  run-on  time
28 AHO  /AHF  Automatical  thermostat  function
29 COOL  Tank  cooling  function
30 BYPR  Bypass  function  (high  temperature)
31 HND  Manual  control
32 PASS  Password  set
33 LOAD  Recovery  to  factory  set
34“ON/OFF”  Controller  switch  on/off  button
35 Holiday  function
36 Manual  heating
37 Manually  control  DHW  pump
38 Temperature  checking  function
39 Protection  function
40 Memory  protection
41 Screen  protection
42 Pump  dry  running  protection
43 Trouble  shooting
44 Trouble  protection
45 Trouble  checking